Skip to content

Fix guide · Updated November 2026

Milk frother or steam wand not working? How to fix it

Quick answer

Dried milk blocking the steam tip or milk system is the most common cause. Clean it, use cold milk, and descale. No steam at all needs a technician.

Safety first

Always unplug the machine first. Never open the casing: it has mains electricity and parts that stay hot and pressurised.

Common causes

  1. 01

    Dried milk in the steam tip or milk system

    It blocks the tiny holes.

  2. 02

    Limescale in the steam circuit

    Steam can't build.

  3. 03

    Worn milk-system seals or tubes

    Air leaks stop it frothing.

  4. 04

    Steam valve or heater fault

    Little or no steam.

  5. 05

    Low steam boiler pressure (commercial)

    Slow, wet steam.

What you can safely check

  • Clear the steam tip holes with the cleaning pin
  • Purge the steam wand before and after every use
  • Run the milk system cleaning programme
  • Use cold, fresh milk or a barista-style alternative
  • Reassemble the milk carafe exactly as the manual shows
  • Descale the machine

When to call a technician

  • No steam comes out at all
  • Steam leaks from the casing
  • The milk system leaks

Repairs for this usually start from AED 149Sample and most machines are back within 48 hours.

Still not working? Send us a photo or video on WhatsApp and we'll tell you what we think.

Brands we often see this on

Related services

Other guides

Written by the Coffer Plus workshop team · Updated November 2026

Machine acting up? Send us a message.

Tell us the brand and the problem. We'll reply with what we think and what it costs.